Episode 22: ‘How to Build a Cafe Racer Guide’ Review

CafeRacerBook

Episode 22: ‘How to Build a Cafe Racer Guide’ Review

Awhile back, we posted this article after a listener told us about Jim March’s “How to Build a Cafe Racer” guide. We skimmed through it, but never really went over it in detail or discussed it.  After we all read the document in depth we saw it had some really good points to discuss. Make sure to download the document below and follow along to the podcast with it.

Continue reading “Episode 22: ‘How to Build a Cafe Racer Guide’ Review”

Episode 21: All About Suspension w/ Ed Sorbo from Lindeman Engineering

 

LE-logo

Episode 21: All About Suspension w/ Ed Sorbo from Lindeman Engineering

If you’re a couple episodes behind, you don’t want to miss this one! We met Ed Sorbo, owner of Lindeman Engineering at Deus Ex Machina’s Saturday School event in April. Ed had a booth at Saturday School and was leading excellent suspension seminars that drew a crowd every time.  We were very excited to have him join us on the show and talk in depth about suspension.

Continue reading “Episode 21: All About Suspension w/ Ed Sorbo from Lindeman Engineering”

Episode 20: Top End Rebuilds Part 2

CBtopendEpisode 20: Top End Rebuilds Part 2

Episode 20 continues with Part 2 of our series on Top End Rebuilds. We pick up where we left off after describing disassembly of your motor to prepare for a top end rebuild. This episode covers the tools necessary to rebuild your top end and the steps to prepare your motor for final reassembly. It’s recommended you have listened to Episode 19 before starting this show.

Continue reading “Episode 20: Top End Rebuilds Part 2”